The Floating Floor Panel can be laid on almost any existing floor surface. It is an ideal system for retrofitting UFH, or as an alternative to screeded floors. The pre-grooved insulation floor panel is made of polystyrene EPS30 and designed for use with the double heat emission plates to distribute the heat over a wider area, and is suitable for use with 17mm UFH pipe spaced at 200mm centres. When used on a ground floor installation, additional insulation may be required to ensure compliance with Building Regulations and to minimize downward losses (<= 10W/m2).
Click on the profiles below to take a look at our floor build ups.
![]() System 1 |
![]() System 2 |
![]() System 3 |