Sole Source Heating

UFHS 200 Watts/m2

 Technical data  
 Output cable
 10 W/m
 Voltage     240 V~
 Voltage     110 V~
 Outer insulation  PVC
 Thickness of mat/wire  ~ 3.3 mm
 Protection class  I + 30mA RCD
 Connections  One side connection
 Net colour  White – textile
 Cable color  Black
 Space between heating wires  6.00 cm
 Supply lead length  4.00m
 Width  500mm
 Sizes available  1-10m²


UFHS has been designed to be used as the sole source of heating in conservatories and other areas.

At 200 Watts/m2 the UFHS mat system is the most powerful on the market. The system is ultra thin, adding only 5mm to the floor depth once installed. The system can be installed either directly beneath the tiles or in the screed for off peak electricity use.

If using underfloor heating as a sole source heating, it is very important install insulation either under the screed or directly below the heating installation. And to make sure the heat output is sufficient we offer a design service, where we can calculate both the heat requirement of the area and the amount of heating mat that needs to be installed.

Tested in accordance with National and International Standards for safety
(IEC, VDE, SEMKO, UL, etc.).
Fulfills the INCIRP guidelines and regulations in regards to the EMF (Electromagnetic Fields).
Complies with wiring rules regarding EMC (Electromagnetic Compatibility).
Should be installed in accordance with National and Local Electrical Codes.
Always read the installation Instructions.

Click here to download a copy of our pricelist.

Comments are closed.